Abstract
The hardness and the elastic modulus of Cu thin films on Si, Ti, Cu, and Al substrates are investigated. It is demonstrated that the use of the Oliver-Pharr method in combination with the technique for evaluating the true hardness makes it possible to determine uniquely the hardness of Cu thin films at different ratios between the hardnesses of the film and the substrate. The elastic modulus of thin films can be correctly measured by the Oliver-Pharr method only in the case where the film and the substrate exhibit identical elastic properties. In order to determine the elastic moduli of films with the use of the parameter P/S2, the film and the substrate should have close values of both the hardness and the elastic modulus.
